Sonore endPoint

Introducing the Sonore endPoint an Ethernet to SPDIF and AES-EBU digital-digital converter. Stream audio content from JRiver, Audirvana Plus, or your favorite DLNA/UPnP controller application on a module device.  

Features

DLNA/UPnP protocol support

24/192 PCM, and DSD64 via DoP

Supports AAC, AIFF, ALAC, FLAC, MP3, and WAV files from HTTP streams
Operates fully asynchronously using on board fixed frequency low noise audio oscillators
Supports gapless playback from your computer, Android device and iOS device

SPDIF via transformer isolated BNC

AES-EBU via transformer isolated XRL  

Made in the USA, with foreign and domestic parts. 
Quality wiring
Quality rear panel DC input jack

Quality rear panel audio jacks

Power requirements: 5 VDC, 500 mA

Enclosure matches the Sonore power supply

Dimensions: 60mm(h)x165mm(w)x165mm(d)

Here are some jitter measurements of the Sonore endPoint

Notes on the art of measurements

*Please note that these measurements fluctuate up and down in real time.

*These are random captures and no effort was made to capture the lowest value. 

*The dashboard of the Audio Preceision analyser is shown so you can see the settings.

* Changing the settings on the left can make the results go up or down.   

Test setup #1

Sonore Linear Power Supply powering the endPoint

Roon streaming a 16 bit 44.1 kHz tone to the endPoint

endPoint SPDIF BNC output to the Audio Preceision analyser

Test setup #2

Sonore Linear Power Supply powering the endPoint

Roon streaming a 24 bit 48 kHz tone to the endPoint 

endPoint SPDIF BNC output to the Audio Preceision analyser